Get Back to Black
Del-Val 112
Black Seal Rubberized Roof Coating
Description
Del-Val 112 Black Seal Rubberized Roof Coating contains a blend of SBS rubbers with solvent based asphalts and reinforcing fibers which forms an elastomeric coating. Del-Val 112 Black Seal Rubberized Roof Coating dries to a tough, durable, flexible coating that gives excellent performance over a wide range of temperatures and weather conditions.
Dries to a tough, durable, flexible coating that gives excellent performance over a wide range of temperatures and weather conditions.
Quick Application Guide
No Threat of Rain
48
Hours (Minimum)
ASTM Compliance
D-4479
Type I
Coverage Rate
2 GAL
Per Square (Per Coat)
Uses
Del-Val 112 Black Seal is designed for a use of flat roof surfaces with positive drainage. It may be used on a variety of surfaces including new or existing built up roofs, APP, SBS, smooth or granulated surfaces, metal surfaces and roll-roofing. DO NOT USE with EPDM, TPO, PVC or other single-ply membranes.
Preparation
All surfaces must be clean and free of any oil, grease, dirt and all other foreign matter. Repair all holes, cracks, blisters, tears or breaks by spreading Roof Master Plus over damaged area then embed United Asphalt Cotton or Fiberglass fabric. Must mechanically mix coating before using.
Application
Apply to a clean, dry surface using a brush, roller or squeegee. For best results weather should be clear with no threat of rain for 48 hours.
Cleanup Del-Val 112 Black Seal Rubberized Roof Coating
Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.
Code Approvals / Compliance
This product meets or exceeds the requirements of ASTM D-4479 Type I
Product Information
Sizes Available
Tools Needed
DATA SHEETS
Have a product specialist reach out to answer any questions you have.
Please fill out the below form completely and we’ll be happy to get in touch with you!