Fibered Aluminum…Elevated.
Del-Val 302
Silver Coat Fibered Aluminum
Bright, Silver Finish. Fiber Reinforced & Highly Reflective Protection!
Description
Del-Val 302 Silver Coat Fibered Aluminum Roof Coating forms a durable protective metallic shield that extends the life of asphalt and metal roof surfaces. Formulated using selected asphalts and blended with high quality aluminum pigments with refined solvents and reinforcing fibers. Del-Val 302 Silver Coat Fibered Aluminum Roof Coating’s highly reflective surface protects the roofs surface from destructive overheating and actinic deterioration.Forms a durable, protective, highly reflective, metallic shield that extends the life of asphalt and metal roof surfaces by adding protection from destructive overheating & actinic deterioration.
Where to Use Del-Val 302 Silver Coat Fibered Aluminum Roof Coating
Quick Application Guide
ASTM Compliance
D-2824
Type III
Coverage Rate
1–1½ GAL
Per Square (Per Coat)
Uses
Del-Val 302 Silver Coat is formulated for applications over new or existing built up roofs, APP, SBS, smooth or granulated surfaces, cap sheet and flashings. It can also be used for masonry surfaces and metal surfaces. DO NOT USE with EPDM, PVC, TPO or other single-ply membranes.Preparation
Prepare the roof surface by sweeping clean any dust, dirt or debris. Use a wire brush to remove and rust from metal. Roof surface must be oil-free and free of moisture both on and beneath the surface. Repair all holes, cracks, blisters, tears or breaks by spreading Del-Val 211 Flashing Cement over damaged area then embed United Asphalt Cotton or Fiberglass Fabric. Allow repairs to cure 60 days before coating.Application
Apply Del-Val 302 Silver Coat with a soft bristled brush, paint roller or heavy duty spray equipment. Product should be mechanically mixed before applying. Spread the product uniformly over the roof surface. Work the coating in one direction. Do not work coating excessively during application. Overworking the coating can have a damaging effect on the leafing of the aluminum. Do not apply if ambient temperature will drop below 32° F in a 24-hour period or dew will settle before coating is allowed to dry.Coverage
Apply at the rate of 1 to 1.5 gallons per 100 sq. ft.Cleanup Del-Val 302 Silver Coat Fibered Aluminum Coating
Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.Code Approvals / Compliance
This product meets or exceeds the requirements of ASTM D-2824 Type III.Product Information
Sizes Available
Tools Needed
DATA SHEETS
Have Additional Questions About Del-Val 302 Silver Coat Fibered Aluminum?
Have a product specialist reach out to answer any questions you may have.
Please fill out the below form completely and we’ll be happy to get in touch with you!