A Staple of Roof Repair
Del-Val 110
Fibered Roof Coating
Description
Del-Val 110 Fibered Roof Coating is a fiber reinforced asphalt roof coating that provides a durable watertight barrier over existing roof surfaces.
Provides a durable, watertight barrier over existing roof surfaces & is reinforced with fibers.
Quick Application Guide
Coverage Rate
4 GAL
Per Square (Per Coat)
Uses
Del-Val 110 Fibered Roof Coating may be used on smooth surface BUR, or SBS and APP bituminous membranes, metal surfaces, roll-roofing. DO NOT USE with EPDM, PVC, TPO or other single-ply membranes.
Preparation
All surfaces must be clean and free of any oil, grease, dirt and all other foreign matter. Repair all holes, cracks, blisters, tears or breaks by spreading Del-Val 211 Flashing Cement over damaged area then embed United Asphalt Cotton or Fiberglass fabric.
Application
Apply to a clean dry surface using a brush or squeegee. For best results weather should be clear with no threat of rain for 48 hours.
Coverage
Apply at the rate of approximately 4 gallons per 100 sq. ft. Must stir coating before using.
Cleanup Del-Val 110 Fibered Roof Coating
Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.
Code Approvals / Compliance
This product meets or exceeds the requirements of ASTM D 4479 Type I
Product Information
Sizes Available
Tools Needed
DATA SHEETS
Have Additional Questions About Del-Val 110 Fibered Roof Coating?
Have a product specialist reach out to answer any questions you may have.
Please fill out the below form completely and we’ll be happy to get in touch with you!