Del-Val 120 Fibered Emulsion Coating in 5 Gallon Bucket

Our Top of the Line Silicone!

AP-5400

High Solids Silicone Roof Coating

Withstands Ponding Water with low VOC & Less Dirt Pickup Compared to Standard Silicone Roof Coatings

Description

Armour Proof AP-5400 High Solids Silicone Roof Coating is an exciting, new high yield, low VOC one-part silicone elastomeric roof coating! It was specifically designed as a protective coating over a variety of roofing substrates. Once cured, this liquid applied silicone coating provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. AP-5400 High Solids Silicone Roof Coating, when compared mil for mil, provides greater UV protection than similar silicone coatings and offers increased resistance to moisture penetration. AP-5400 provides excellent long term protection through exceptional weather-ability properties.

High Solids, Low Volatile Organic Compounds (VOC) and Greater UV Protection & Increased Resistance to Moisture Penetration.

Where to Use AP-5400 High Solids Silicone Roof Coating

[dvmd_table_maker tbl_row_header_count=”0″ tbl_responsive_break_by=”row” tbl_tcell_cell_color=”#e3e6ea” tbl_chead_cell_color=”#009bdf” tbl_chead_cell_align_horz=”center” tbl_chead_cell_align_vert=”center” admin_label=”Where to Use Table” _builder_version=”4.20.0″ _module_preset=”default” tbl_chead_text_text_color=”#FFFFFF” tbl_chead_text_font_size=”10px” tbl_chead_text_line_height=”0.95em” custom_margin=”|||-30px|false|false” custom_margin_tablet=”|||0px|false|false” custom_margin_phone=”|||0px|false|false” custom_margin_last_edited=”on|phone” border_width_all_tbl_chead_cell_border=”0px” global_colors_info=”{}” theme_builder_area=”post_content”][dvmd_table_maker_item col_label=”Surface 1″ col_content=”Metal
close_alt” col_column_max_width=”1fr” col_icon_size=”28px” col_icon_color=”#D0202E” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” col_rhead_cell_align_horz=”center” col_rhead_cell_align_vert=”center” _builder_version=”4.20.0″ _module_preset=”default” col_chead_text_font=”|||on|||||” col_chead_text_font_size=”17px” global_colors_info=”{}” theme_builder_area=”post_content”][/dvmd_table_maker_item][dvmd_table_maker_item col_label=”Surface 2″ col_content=”BUR
check_alt” col_column_max_width=”1fr” col_icon_size=”28px” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” col_rhead_cell_align_horz=”center” col_rhead_cell_align_vert=”center” _builder_version=”4.18.1″ _module_preset=”default” col_chead_text_font=”|||on|||||” col_chead_text_font_size=”17px” global_colors_info=”{}” theme_builder_area=”post_content”][/dvmd_table_maker_item][dvmd_table_maker_item col_label=”Surface 3″ col_content=”Primed Wood
check_alt” col_column_max_width=”1fr” col_icon_size=”28px” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” col_rhead_cell_align_horz=”center” col_rhead_cell_align_vert=”center” _builder_version=”4.18.1″ _module_preset=”default” col_chead_text_font=”|||on|||||” col_chead_text_font_size=”17px” global_colors_info=”{}” theme_builder_area=”post_content”][/dvmd_table_maker_item][dvmd_table_maker_item col_label=”Surface 4″ col_content=”Concrete
check_alt” col_column_max_width=”1fr” col_icon_size=”28px” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” col_rhead_cell_align_horz=”center” col_rhead_cell_align_vert=”center” _builder_version=”4.18.1″ _module_preset=”default” col_chead_text_font=”|||on|||||” col_chead_text_font_size=”17px” global_colors_info=”{}” theme_builder_area=”post_content”][/dvmd_table_maker_item][dvmd_table_maker_item col_label=”Surface 5″ col_content=”Single-Ply
check_alt” col_column_max_width=”1fr” col_icon_size=”28px” col_icon_color=”#000000″ col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” col_rhead_cell_align_horz=”center” col_rhead_cell_align_vert=”center” _builder_version=”4.18.1″ _module_preset=”default” col_chead_text_font=”|||on|||||” col_chead_text_font_size=”17px” global_colors_info=”{}” theme_builder_area=”post_content”][/dvmd_table_maker_item][dvmd_table_maker_item col_label=”Surface 6″ col_content=”Spray Foam
check_alt” col_column_max_width=”1fr” col_icon_size=”28px” col_icon_color=”#000000″ col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” col_rhead_cell_align_horz=”center” col_rhead_cell_align_vert=”center” _builder_version=”4.18.1″ _module_preset=”default” col_chead_text_font=”|||on|||||” col_chead_text_font_size=”17px” global_colors_info=”{}” theme_builder_area=”post_content”][/dvmd_table_maker_item][/dvmd_table_maker]

Coverage & Drying Time

Apply AP-5400 at the rate of 1.5 gallons per square. Minimum dry mil thickness shall be above 20 mils. Two passes of silicone and a primer coat may be required for some applications and warranty programs. PRODUCT APPLICATION SHOULD BE SUSPENDED IMMEDIATELY AND OUR TECHNICAL SERVICE PERSONNEL CONTACTED IF THE RESULTS BEING OBTAINED ARE LESS THAN DESIRABLE. Refer to the Armour Proof Coatings Specification for detailed instructions.

Application

AP-5400 High Solids Silicone Roof Coating may be applied by medium nap rollers, soft brushes or high pressure airless spray equipment. Apply AP-5400 only to clean, dry, sound surfaces free of loose particles or other foreign matter. For best results, ambient temperature should be between 50-90°F. Higher temperatures will shorten the cure and working times for proper application of granules before the material has skinned. Lower temperatures will lengthen the skinover, tack free and ultimate cure time. Sudden temperature declines may also result in dew formation on surfaces, which can prevent adhesion development. For best results, relative humidity should be above 20%. Lower humidity will slow the cure time significantly.

Preparation of Substrate

Surface must be pressure washed clean, free of all loose particles, dirt debris and other contaminants that could inhibit adhesion. An Armour Proof primer may be required for the particular substrate. Refer to the Armour Proof Coatings Specification for detailed instructions on how to prepare the specific substrate.

Limitations and Precautions

AVOID CONTAMINATION IN SEALED CONTAINERS. STORE AWAY FROM HEAT, SOURCES OF IGNITION AND INCOMPATIBLES. USE ONLY IN WELL VENTILATED AREAS. Do not inhale vapor or mist. Do not get on skin, in eyes or on clothing. Refer to SDS for more information.

Application Information

[dvmd_table_maker tbl_row_header_count=”0″ tbl_responsive_break_by=”row” tbl_frame_type=”none” tbl_stripes_active=”vert” tbl_tcell_cell_color=”#FFFFFF” tbl_chead_cell_color=”#009bdf” tbl_chead_cell_align_horz=”center” tbl_chead_cell_align_vert=”center” admin_label=”Where to Use Table” _builder_version=”4.20.0″ _module_preset=”default” tbl_tcell_text_font_size=”22px” tbl_tcell_text_letter_spacing=”1.5px” tbl_chead_text_font=”|600|||||||” tbl_chead_text_text_color=”#FFFFFF” tbl_chead_text_font_size=”17px” tbl_chead_text_letter_spacing=”1px” tbl_chead_text_line_height=”1.1em” custom_margin=”||||false|false” custom_margin_tablet=”|||0px|false|false” custom_margin_phone=”|||0px|false|false” custom_margin_last_edited=”on|phone” border_width_all_tbl_tcell_cell_border=”0px” border_color_all_tbl_tcell_cell_border=”RGBA(255,255,255,0)” border_width_all_tbl_chead_cell_border=”0px” locked=”off” global_colors_info=”{}” theme_builder_area=”post_content”][dvmd_table_maker_item col_label=”Info 1″ col_content=”Minimum Pump Pressure
3000 psi” col_column_max_width=”1fr” col_icon_size=”28px” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” col_rhead_cell_align_horz=”center” col_rhead_cell_align_vert=”center” _builder_version=”4.20.0″ _module_preset=”default” col_chead_text_font=”|||on|||||” col_rhead_text_font_size=”0px” global_colors_info=”{}” theme_builder_area=”post_content”][/dvmd_table_maker_item][dvmd_table_maker_item col_label=”Info 2″ col_content=”Tip Size
.027%22-.039%22 (.031%22 recommended)” col_column_max_width=”1fr” col_icon_size=”28px” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” col_rhead_cell_align_horz=”center” col_rhead_cell_align_vert=”center” _builder_version=”4.20.0″ _module_preset=”default” col_chead_text_font=”|||on|||||” col_rhead_text_font_size=”0px” global_colors_info=”{}” theme_builder_area=”post_content”][/dvmd_table_maker_item][dvmd_table_maker_item col_label=”Info 3″ col_content=”Hose
Use ⅜%22 up to 100′. Use ½%22+ for 100’–200′” col_column_max_width=”1fr” col_icon_size=”28px” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” col_rhead_cell_align_horz=”center” col_rhead_cell_align_vert=”center” _builder_version=”4.20.0″ _module_preset=”default” col_chead_text_font=”|||on|||||” col_rhead_text_font_size=”0px” global_colors_info=”{}” theme_builder_area=”post_content”][/dvmd_table_maker_item][/dvmd_table_maker]

Use as Part of a System with these products:

AP-2400

Silicone Mastic

AP-5100

Moisture Cure Polyurethane

AP-5200

Silicone Roof Coating

Product Information

Sizes Available

Tools Needed

DATA SHEETS

Data Sheet

SDS Sheet

Available From These Distributors

Click a logo to find a location close to you.

Grow Your Roofing Business

Become an approved applicator of our Armour Proof Coatings systems and gain the perks of being a trusted and approved contractor. Benefits include project referrals, marketing assistance, product trainings & more!

Learn More & Apply

Have Additional Questions About AP-5400 High Solids Silicone Roof Coating?

Looking for information on Warranted Roof Coating Systems?

Request a Warranty

Have a product specialist reach out to answer any questions you have.

Please fill out the below form completely and we’ll be happy to get in touch with you!

New Inquiry for AP-5400 High Solids Silicone Roof Coating